| Geometric flow control of shear bands by suppression of viscous sliding D Sagapuram, K Viswanathan, A Mahato, NK Sundaram, R M'Saoubi, ... Proceedings of the Royal Society A: Mathematical, Physical and Engineering …, 2016 | 68 | 2016 |
| Surface folding in metals: a mechanism for delamination wear in sliding A Mahato, Y Guo, NK Sundaram, S Chandrasekar Proceedings of the Royal Society A: Mathematical, Physical and Engineering …, 2014 | 51 | 2014 |
| On control of flow instabilities in cutting of metals D Sagapuram, H Yeung, Y Guo, A Mahato, R M'Saoubi, WD Compton, ... CIRP Annals 64 (1), 49-52, 2015 | 45 | 2015 |
| Severe wear of a near eutectic aluminium–silicon alloy A Mahato, N Verma, V Jayaram, SK Biswas Acta Materialia 59 (15), 6069-6082, 2011 | 38 | 2011 |
| Role of silicon in resisting subsurface plastic deformation in tribology of aluminium–silicon alloys A Mahato, S Xia, T Perry, A Sachdev, SK Biswas Tribology International 43 (1-2), 381-387, 2010 | 36 | 2010 |
| Sinuous flow in cutting of metals H Yeung, K Viswanathan, A Udupa, A Mahato, S Chandrasekar Physical Review Applied 8 (5), 054044, 2017 | 27 | 2017 |
| Pressure and thermally induced stages of wear in dry sliding of a steel ball against an aluminium–silicon alloy flat A Mahato, TA Perry, V Jayaram, SK Biswas Wear 268 (9-10), 1080-1090, 2010 | 26 | 2010 |
| Folding in metal polycrystals: microstructural origins and mechanics NK Sundaram, A Mahato, Y Guo, K Viswanathan, S Chandrasekar Acta Materialia 140, 67-78, 2017 | 23 | 2017 |
| Nucleation and propagation of solitary Schallamach waves K Viswanathan, A Mahato, S Chandrasekar Physical Review E 91 (1), 012408, 2015 | 22 | 2015 |
| Evolution of regimes of wear in zircaloy-4/inconel-600 contact subjected to fretting loading K Singh, M Tiwari, A Mahato Tribology International 147, 106274, 2020 | 20 | 2020 |
| Lubricated tribology of a eutectic aluminium-silicon alloy in the ultra-mild wear and mild wear regimes for long sliding times A Mahato, A Sachdev, SK Biswas ACS Applied materials & interfaces 2 (10), 2870-2879, 2010 | 16 | 2010 |
| Sinuous flow and folding in metals: Implications for delamination wear and surface phenomena in sliding and cutting A Mahato, H Yeung, Y Guo, K Viswanathan, NK Sundaram, A Udupa, ... Wear 376, 1534-1541, 2017 | 14 | 2017 |
| Damage analysis of carbon fiber reinforced aluminum laminate under short beam and single edge notch beam bend test RK Gupta, A Mahato, A Bhattacharya International Journal of Mechanical Sciences 198, 106393, 2021 | 13 | 2021 |
| Surface phenomena revealed by in situ imaging: studies from adhesion, wear and cutting K Viswanathan, A Mahato, H Yeung, S Chandrasekar Surface Topography: Metrology and Properties 5 (1), 014002, 2017 | 13 | 2017 |
| Vehicle lightweighting: challenges and opportunities with aluminum AK Sachdev, RK Mishra, A Mahato, A Alpas ICAA13 Pittsburgh: Proceedings of the 13th International Conference on …, 2016 | 13 | 2016 |
| Quantitative in situ analysis of deformation in sliding metals: effect of initial strain state A Mahato, NK Sundaram, H Yeung, M Lukitsch, AK Sachdev, ... Tribology Letters 60, 1-11, 2015 | 12 | 2015 |
| Strength and failure behavior of carbon fiber reinforced aluminum laminates under flexural loading RK Gupta, A Mahato, A Bhattacharya Mechanics of Advanced Materials and Structures 29 (5), 662-676, 2022 | 9 | 2022 |
| Kinematic flow patterns in slow deformation of a dense granular material K Viswanathan, A Mahato, TG Murthy, T Koziara, S Chandrasekar Granular Matter 17, 553-565, 2015 | 8 | 2015 |
| Transition from mixed stick-slip to gross-slip regime in fretting K Singh, A Mahato, M Tiwari Tribology International 165, 107338, 2022 | 7 | 2022 |
| Effect of particle morphology on resistance to permanent sinking by normal loading of silicon particle in aluminium matrix of a cast aluminium silicon alloy A Mahato, AK Sachdev, SK Biswas Wear 265 (5-6), 849-855, 2008 | 7 | 2008 |
