Dr. Rajendra Nath Basu
Cited by
Cited by
Multifunctional nanostructured electrocatalysts for energy conversion and storage: current status and perspectives
S Ghosh, RN Basu
Nanoscale 10 (24), 11241-11280, 2018
Nanostructured conducting polymers for energy applications: towards a sustainable platform
S Ghosh, T Maiyalagan, RN Basu
Nanoscale 8 (13), 6921-6947, 2016
Fabrication of dense zirconia electrolyte films for tubular solid oxide fuel cells by electrophoretic deposition
RN Basu, CA Randall, MJ Mayo
Journal of the American Ceramic Society 84 (1), 33-40, 2001
Combustion synthesis and characterization of LSCF-based materials as cathode of intermediate temperature solid oxide fuel cells
A Dutta, J Mukhopadhyay, RN Basu
Journal of the European Ceramic Society 29 (10), 2003-2011, 2009
Complex-plane impedance analysis for semiconducting barium titanate
HS Maiti, RN Basu
Materials research bulletin 21 (9), 1107-1114, 1986
Simplified processing of anode-supported thin film planar solid oxide fuel cells
RN Basu, G Blass, HP Buchkremer, D Stöver, F Tietz, E Wessel, IC Vinke
Journal of the European Ceramic Society 25 (4), 463-471, 2005
Fabrication of Bi 2 S 3/ZnO heterostructures: an excellent photocatalyst for visible-light-driven hydrogen generation and photoelectrochemical properties
S Bera, S Ghosh, RN Basu
New Journal of Chemistry 42 (1), 541-554, 2018
Correlation between slurry rheology, green density and sintered density of tape cast yttria stabilised zirconia
A Mukherjee, B Maiti, AD Sharma, RN Basu, HS Maiti
Ceramics International 27 (7), 731-739, 2001
Microstructure and property evaluation of barium aluminosilicate glass–ceramic sealant for anode-supported solid oxide fuel cell
S Ghosh, P Kundu, AD Sharma, RN Basu, HS Maiti
Journal of the European Ceramic Society 28 (1), 69-76, 2008
Processing of high-performance anode-supported planar solid oxide fuel cell
RN Basu, AD Sharma, A Dutta, J Mukhopadhyay
International Journal of Hydrogen Energy 33 (20), 5748-5754, 2008
Materials for solid oxide fuel cells
RN Basu
Recent trends in fuel cell science and technology, 286-331, 2007
Visible-light-induced reduction of Cr (VI) by PDPB-ZnO nanohybrids and its photo-electrochemical response
S Ghosh, H Remita, RN Basu
Applied Catalysis B: Environmental 239, 362-372, 2018
Photocatalytic hydrogen generation using gold decorated BiFeO3 heterostructures as an efficient catalyst under visible light irradiation
S Bera, S Ghosh, S Shyamal, C Bhattacharya, RN Basu
Solar Energy Materials and Solar Cells 194, 195-206, 2019
Synthesis of nanocrystalline Li4Ti5O12 by a novel aqueous combustion technique
MW Raja, S Mahanty, M Kundu, RN Basu
Journal of Alloys and Compounds 468 (1-2), 258-262, 2009
Highly active multimetallic palladium nanoalloys embedded in conducting polymer as anode catalyst for electrooxidation of ethanol
S Ghosh, S Bera, S Bysakh, RN Basu
ACS applied materials & interfaces 9 (39), 33775-33790, 2017
Development and characterizations of BaO–CaO–Al2O3–SiO2 glass–ceramic sealants for intermediate temperature solid oxide fuel cell application
S Ghosh, AD Sharma, P Kundu, S Mahanty, RN Basu
Journal of Non-Crystalline Solids 354 (34), 4081-4088, 2008
Low temperature sintering of La (Ca) CrO3 prepared by an autoignition process
A Chakraborty, RN Basu, HS Maiti
Materials Letters 45 (3-4), 162-166, 2000
Effect of BaO addition on magnesium lanthanum alumino borosilicate-based glass-ceramic sealant for anode-supported solid oxide fuel cell
S Ghosh, AD Sharma, AK Mukhopadhyay, P Kundu, RN Basu
International Journal of hydrogen energy 35 (1), 272-283, 2010
Preparation of nickel coated YSZ powder for application as an anode for solid oxide fuel cells
SK Pratihar, AD Sharma, RN Basu, HS Maiti
Journal of Power Sources 129 (2), 138-142, 2004
Nanostructured zirconia thin film fabricated by electrophoretic deposition technique
D Das, B Bagchi, RN Basu
Journal of Alloys and Compounds 693, 1220-1230, 2017
The system can't perform the operation now. Try again later.
Articles 1–20